SOLAR MOLE REPELLER A device powered by solar energy, making use of sound waves to repel mole, rat... By emitting sound waves, the Solar Mole Repeller drives away snake very effectively. The sound waves will irritate them, simulate danger, and repel them away from the irradiated area. Transmitting sound waves every 40 seconds or so, the Solar Mole Repeller is effective within an area of 625 square meters.
The Solar Snake Repeller radiates in all directions. Avoid any obstruction and let the sound waves be emitted freely. To make the best use of the product, we strongly recommend an installation of 2 devices at every 30 meters for ground areas frequented by Mole.
The Solar Mole Repeller’s power is supplied by a solar cell, a rechargeable accumulator collecting power for operation at night. When the accumulator is fully charged, it can supply enough power for the dark hours, thus ensuring a continuous around-the-clock operation.
Technical data:
Power supply: solar energy cell, and long-effective Ni-Cd cell recharged by solar energy.
Frequency: 400HZ-1000HZ
The device use computerized inching control technology, it is combine the signal output with DC charge function. So the socket is not only signal output socket, but also is external DC charger for consecutive rainy days’ use. this new technology apply is more convenient to customers operate and bring the additional value to this models.
Please note:
First, check the ground surface before using it. Frozen soil, irrigated or waterlogged ground is not suitable. Dig a hole into solid earth to place the device. The density of the soil will greatly affect the effectiveness of the device. The more solid the earth, the better the device will be functioning.
No hammer should be used in installation.
No excessive force should be applied lest the device be damaged.
Installation:
1. Connect cable with the tope, tighten can not depart easily.
2. Fix the bar and the top together.
3. Insert the bar into the earth, according to the terrain varies ensure the water does not exceed the save line (note illustration) lest the device be damaged, or bump into any obstruction.
1. The base of the top shall be exposed to the outside, according to the terrain varies ensure the water does not exceed the save line (note illustration).
2. Before first use,you’d better insolation the solar panel for two days,then connect the cable and insert into the earth，so you will have better effective.
Packing information:
Model size(max.):43.8x15.4x15.4CM
Color box size:39.5x15.5x9.5CM
QTY:10PCS
N.W.:5 KGS
G.W.:6 KGS
MEAS:49X40.5X32.5CM
20FT': 4490 PCS
40FT': 8990 PCS
40HQ :10540PCS
